A modern computer allows you to connect quite a lot of various devices to yourself, some of which allow it to turn it into a gaming center. Of course, the mass of joysticks, gamepads and other gaming devices will make your computer favorite holiday destination, and sometimes adults.
Instruction
In some cases, in order to increase the game "power" of its computer, it is worth thinking about the acquisition of such modern gaming devices as the steering wheel and pedals. After all, it may be better than to drive into new races using the controls that are available to the present rider. Meanwhile it is worth remembering that any computer device Requires certain knowledge in order to connect it to correctly, and sometimes configure. Similarly, in order to connect the steering wheel and pedals to a computer, you will need to spend some actions. First, it is worth finding out when buying a similar device, how and to which port it is connected. Usually modern gaming rudders with a set of pedals are connected with one wire to the free USB port of the computer, however, it is worth clarifying the seller if it is. You should also think about whether there is available on the computer you want to equip a similar game device, the corresponding free USB port. Although if the computer is in use for a while, usually all ports are already busy. These can be connected to the scanner, webcam, printer and a number of other devices. In this case, in order to connect the steering wheel and pedals to the computer, it is worth purchasing a USB hub that will add several free ports. In case not all ports are busy, there is nothing easier than connecting a new game device, simply inserting the cable into the corresponding connector of the computer. It is worth noting that it is usually no compliance with connection. The only disappointment that can comprehend the lover of racing is the lack of supporting such management devices for the favorite game.
Computer games capture seriously and for a long time - especially in cases where they most realistically imitate any actions. An example of such games is a variety of sports and transport simulators, and of course, virtual races in which today the functions of real racing machines are almost completely copied, and playing such games, you are immersed in the atmosphere of the racing route, enjoying the car control. In stores you can purchase various steering patterns and pedals for games, but all of them are quite expensive, and if you have certain skills to work with mechanics and electronics, you can make such a device yourself.
Instruction
To make a working module with pedals, pre-draw, drink and assemble the casing of the base from plywood with a thickness of 12 mm., With gentleboard, for convenient legs. The transverse plate of plywood casing, installed from the inside, closer to the front ache corner of the bevel, should be made of solid wood, which will hold the tension of the refund spring. For fastening the pedals, use a steel tube with a thickness of 12 mm. And bolts that you screw to the pedal tube.
At the bottom of the tube there must be a rod with a diameter of 5 mm. Holding the pedal in the brackets. Brackets Make from durable metal corners and firmly screw them to the base of the casing.
Making a transverse bar, which was said to be slightly talked, measure and drink it so that it exactly corresponds to the width of the casing of the pedal module and was most firmly screwed or glued to its walls and base.
In the crossbar, drill the hole and screw the screw with a metal ear into its center, fixed on the back of the nut. At the end of the back of the return to the ear, and secure it on the metal tube to the second end, to which the pedal is attached.
Then, set the potentiometer for the pedal in the back of the housing, on the L-shaped bracket, attaching it on the bushings to the pedal drive so that it is able to rotate 90 degrees in both directions.
The design of the pedal module is completed - it remains to connect it to the computer along with the wheel and gearbox.
Xbox 360 - Popular game console from Microsoft. This prefix is \u200b\u200bnow quite popular among gamers, as it is convenient and has excellent specifications. The prefix is \u200b\u200bequipped with a wireless game controller or, as it is also called, gamepad. If you have purchased yourself an Xbox console, but do not know how to connect gamepad to game consoleThis instruction will help you.
Instruction
Press the GEIDE button on the gamepad. Hold it until the gamepad and the gaming console earn.
The power button on the console itself simply press and release. Hurry up for twenty seconds to press and release the connection button on the gamepad housing.
Wait until light indicators Next to the power button on the console will not finish flashing. When they stop flashing, it will mean that the gamepad connected.
In the event that the gamepad did not turn on, check if batteries work. In Gamepad, you need to use AA batteries. If they do not work, then insert new ones.
For the power of the gamepad, you can use special devices - Xbox 360 Play & Charge Kit or Xbox 360 Quick Charge Kit.
To one console can be connected to four gamepads. Therefore, if you need to connect more gamepad to the console, repeat all actions for each gamepad. In this case, each of them will be assigned a certain quadrant. There are four indicators, which correspond to the quadrants around the console button and the guide button on the gamepades. In order to disable the gamepad, press the GUIDE button and hold it down for three seconds. After that, turn off the gamepad. If you turn off the console, the gamepad itself reconnects when the next turn is turned on.
Also keep in mind that at one moment the gamepad can only be connected to some one console, and if you want to connect it to another console, the connection from the first will have to be interrupted.
If the gamepad is not connected, then try to do the following: 1. Turn off the console, and in a minute turn on again2. Replace batteries in Gamepad
3. All items that are between gamepad and console are removed, especially if these items are radiation sources - microwaves, Televisions, Mobile and Wireless Home Phones, Metal and Chrome Racks I.D. Udaches You Connects and Successful Game!
To connect the steering wheel to the game, you do not need to have any specific knowledge - the connection is performed almost instantly, you can only adjust control in the game convenient for you.
You will need
- - a computer
- - Steering wheel with pedals
- - A game that supports connecting such a device.
Instruction
Connect the steering wheel to the computer. To connect the steering wheel to a PC, just join the USB cord to one of the free ports of your computer. After you do it, connect the pedal to the steering wheel and insert the power supply into the outlet. Now the steering wheel is connected to the computer. Setting the game for steering. Enter the game that supports the steering mode and go to the settings menu. Here you should choose the "Management Settings" option. In addition to the "Keyboard Settings" menu and "Mouse Settings" menu, you will see the "Alternative Management" section - it is he who needs you. Entering this menu, set the desired parameters for certain buttons as it will be convenient for you. Saving all the settings, start a new game. Possible problems. If, after you entered the game Steering remains inactive, it can be two reasons for this: the computer has not defined the device or you have not installed the appropriate driver (some steering patterns provide for the preset driver on the PC). However, all this can be revealed at the control settings stage - if at the time of the control setting when you try to shift the keys, the steering button does not respond, it means that it is inactive. In this case, you need to install the driver on the PC, which is supplied with the device. After installation, repeat all the second steps actions.
The efficiency of your scanner is partially dependent on the type of interface used to connect to the computer. Different models of scanners are connected to a computer. different ways. Some scanners use a special adapter, which is inserted into the computer's motherboard. Others are connected using a parallel port, or sCSI interfaceeither uSB ports.
Instruction
Connection via LPT ( parallel Port.) - This is the easiest way that does not require additional equipment. But at the same time, this connection is not calculated on a high data transfer rate, and therefore this method is typical for low-cost scanners. SCSI Scanners use more advanced SCSI adapters that you can connect both to PC and Macintosh. This connection provides a higher data transfer rate, compared with LPT models. In the event that there is no SCSI controller in the computer, then manufacturers include special fees for connecting to the ISA connector. Remember that some computers may not have an ISA connector, so before purchase it is necessary to make sure that your computer supports this connection.
The most advanced scanner models use a more high-speed USB interface that allows you to connect any device without turning off your computer. This interface may be absent on old computers.
Video on the topic
In connection with the rapid development of the computer and the game industry, new devices for expanded use of the usual began to appear on the market. computer games. Such innovations became kits, including rudders and pedals. Today, some games require the presence of steering wheel, which was also invented parallel to its land analogue. When connecting these innovations, problems may arise associated with the absence of a specific software in operating system.
You will need
- Interactive car driver set.
Instruction
When installing this device, it is worth paying attention to the correct step-by-step connection. As a rule, the instruction that is included in the kit of this device helps to fully respond to all the questions associated with the connection. You must connect a new device according to this instruction. If you have a disk with drivers, install them. Connecting this device can be continued with an accurate setting. As part of the operating room windows systems XP has a utility that can help you in setting up the steering wheel and pedals. Click the Start menu - select "Control Panel" - "Games". A new game devices window will appear on the screen. This window displays a list of installed gaming equipment. If you install for the first time tools for games, the list will be empty. To add a new device, click the Add button.
In the "Adding Game Device" window, find the list "Game devices" and select the type of hardware connected. Put the mark on the "Connect Steering and Pedals" item at the bottom of the menu.
In the window that opens, select the type of your device if your device has not turned out there, click the "Other" button. In a new window, select one of the following options: - Joystick; - game tablet; - steering wheel or control handle;
Management of racing car.
Select the desired type and specify the number of directions that will be involved by your device (2 or 4). You should also specify the number of buttons located on the panel of your device. Among other settings, you can use the viewing view (top view, view from the cabin, rear view). To activate this mode, turn on the "POV switch" option. The last step in setting up the new device will enter it in the "Controller" field. Then click "OK" to return to the basic window "Game devices".
Today, any PC user has the opportunity to connect a huge number of devices to its "microcham" to a friend. Connecting a special steering wheel with pedals will allow you to feel yourself in the world of virtual pleasure, because In recent years, this direction does not stand still, but constantly moving.
You will need
- - IBM PC compatible computer;
- - Computer steering wheel.
Instruction
The latest innovations of this industry are allowed to notify the driver when they are in charge of the vehicle. How can the steering wheel do it? Not to eat directly - creates vibration in the entire steering column. But for the proper operation of this device, it is necessary, first of all, install and configure, because Each game makes its requirements to such devices.
First of all, you need to find out how the automotive steering wheel is connected to the computer. Latest models Support the USB connection, the more recently a new technology has been published in "Light" - USB 3.0, which can significantly increase the speed of access to additional devices. If you do not have the most new version of the steering wheel and it does not support the USB connection, and you have not been detected by you, get a special adapter.
After determining the type of connection, you must make sure there are free USB ports. As you know that now a large number of devices are available with USB interface. If you find that free connectors did not turn out or it is only one, try to attach a special separator to a computer (HUB).
Do not forget that for detecting and proper operation you need to install drivers, which, as a rule, are included in the kit (on a CD-disk). But if they were not, therefore, they do not need either it can be easily downloaded from the Internet - open the manufacturer's web page in the browser and go to the downloads section by specifying your model (there is in instructions for use).
Also, you should not forget that you first connect the steering wheel, and then turn on the game, otherwise the gamepad control settings may not be. Please note that many models are proper connection Include an indication, for example, on the rugs of some manufacturers there is a scale of pressing a gas pedal.
After starting the game, go to the controller settings (control) and specify the gamepad as an alternative to the keyboard. Here you can configure the purpose of many buttons. Remember that for such a device there is no pedal of "clutch", so it must be configured by specifying as this pedal any of the buttons unused. LPT is a connector used in some printer models in modern computersAs a rule, there is no, which complicates the process of using the equipment. To use the LPT printer, you will need to purchase a special adapter and configure software.
You will need
Instruction
Check the LPT-USB adapter. You can buy it in a computer store or in the radio engineering market, where all sorts of adapters for such devices are sold. One end of the adapter, set the printer cable and secure it. The other end of the wire is stored in the computer's USB port.
After connecting, wait for the device to define the system. Most likely, the system does not recognize the installed printer, and therefore you will need to download the appropriate device drivers.
Insert the disk that was supplied in one set with a printer into your computer drive. Wait for the disc boot, then click on the "Start" menu. Right-key, select Computer and click "Properties". On the left side of the window that appears, select "Device Manager" and go to the "Printers" section. Click the right mouse button on unidentified hardware and select "Update Driver", then specify "Automatic Search for Equipment Drivers" and click Next.
If you do not have a printer disk, go to the official website of the manufacturer of your device. Find a section "Service and Support" or "Driver Loading", after which you find your printer model and download the appropriate files using the site menu. After downloading, make the installation of the downloaded installer by running it on the computer.
After installing the driver, reconnect the printer and restart the computer's operating system. Go to the "Start" section - "Devices and Printers". If your printer is displayed in the selected section, the installation has passed successfully, and you can proceed to print.
note
Some motherboard models have support for LPT slot, but the desired connector may not be displayed on the computer housing panel. To make sure that you need the desired port, use the instructions for your motherboard.
You can also purchase an LPT loop in a computer store and install it yourself by opening the computer case and installing the connector into the appropriate motherboard slot. After that you can directly connect your printer without an adapter.
How to connect the steering wheel and pedals to the computer
www.kakprosto.ru.
How to connect the steering wheel to the computer
Connecting the steering wheel and pedals to the game PC is made according to the scheme, normal for all control devices - keyboards, mice, joystick or gamepad. They are equipped with a USB port, thanks to which the "hot connection" occurs - the computer instantly recognizes the device and allows them to use it. Consider this process more.
If, after switching on to USB port, nothing happened, or the steering wheel does not work as I would like, we need a set of drivers or special software. As a rule, you can find it on the manufacturer's website or on the disk "from the box." It will also not be prevented to read the instructions for the device, in which comprehensive answers to all questions are often given. We find the disc, insert it into the drive and run the installer.
If after the previous step, the steering wheel did not earn, it may not be determined by the system. To check this guide, we go to the "Start" menu, open the "Control Panel" menu, item "Equipment and Sound". In Windows 7, the sub-paragraph "View devices and printers" is located, in which all connected game devices will be marked, including the steering wheel.
If the steering wheel is not there, in the upper left corner we are looking for the "Add" button, press it and give a system to search for available devices. When the device is found, choose it and click the "Next" button.
To calibrate the game steering wheel, go back to "Start" -\u003e "Standard" -\u003e "Run" and enter the JOY.CPL command in the corresponding line. A list of working devices will appear in the window that opens. To configure them, click on the right mouse button right and select the item "Properties". Similarly, the steering wheel is calibrated through the "Control Panel" -\u003e Equipment and Sound. In the Gaming devices section, select the appropriate, click "Properties", get a dialog box with the "Settings" tab. It will "calibrate" button, which we use.
In calibration mode, the user indicates the normal position of the steering wheel (joystick, gamepad) and its maximum deviations on all axes, as well as special positions, reactions of buttons and other control structures. Since all information about the testing process will be displayed on the screen, make sure the steering wheel reacts as you need. Here is a small list of games with the use of steering and pedals:
- Euro Truck. Simulator 2;
- AUTO CLUB REVOLUTION;
- Race.driver.grid.;
- Driver Parallel Lines;
- Test Drive Unlimited;
- rFACTOR (+ mods of different years);
- cOLIN M'CRAY RALLY series;
- Richard Burns Rally;
- Live for Speed;
- TOCA RACE DRIVER 3;
- F1 Challenge 99-02;
- BMW M3 Challenge;
- Truckers 2;
- NFS Undergraund and Most Wanted;
- gTR series.
In the event that problems still occur, check the compatibility of the steering wheel with the game, its minimum and recommended requirements. Such control devices are also not recommended to be stored under the influence of direct sunlight, drop on the floor or twist their cable. Each liquid hit will adversely affect the helm performance.
sovetclub.ru.
Ways to connect a play steering wheel with pedals to a laptop or computer
As there, in the famous vigor "I want to know everything" - "Nut of a knowledge of Kniffs, but still ..." and so on. Yes, you can remember even the very good magazine "Knowledge - Strength". No, everything is true, everything is true, knowledge is a big thing. But sometimes they can only harm. You start to be wonderful, it is not known what, seeing the same steering wheel or pedal, although in fact everything is elementary simply. Do not just need what is called, to take an extraneous one.
We look, that "who knows a scientist, with experiences" passed the wheel for an hour. And this boy, without a year a week on a computer, problem, how to connect the steering wheel with pedals to a computer, decides literally in 10 minutes. So he has blue eyes open for all 100, a smile to ears, he is not afraid of anything and the coffee almost spilled on new pedals, and the hands are shaking from one type of boxes and the view, well, terribly serious.
In other words, what do we want to say? Yes, that to connect the steering wheel to the computer, the joy of life is required, approximately the joy for which these devices themselves are intended.
Principle is still the same, not more difficult than flash drives
Okay, for those who are used to living, "like in the bishops", say - installing and setting up the steering wheel and pedals are practically no different from the installation of any other equipment, the same printer or scanner.
So, begin, but helps us, as always, this saving USB port. First, we hold the connection of cables and connections. Here, be more detailed, and we advise not to neglect the schemes with which the installation instructions are included in the package of devices. Schemes and help to quickly decide how to connect the game steering wheel.
We connect the steering wheel and the pedals among themselves - the designs exist different: the steering wheel to the pedal and further in the laptop, the pedal to the steering wheel, it does not have any fundamental importance. The main thing is that when you insert the cable in the laptop USB connector, the devices will start automatically recognized. Ideally, the whole process immediately for 20-30 seconds will end, it will remain only with surprise from such simplicity in the lower right corner of the screen to read the phrase look: "The device is installed and ready to work."
Still, we will not offend the steering wheel, it's not a flash drive
But just say, the steering wheel and pedals are still not a flash drive, it may not get to such an elementary. Moreover, most likely the phrase will be different, something like the "device is not ready" or "the device is not recognized."
Nothing terrible, this is the normal course of things. So, the system did not recognize your racestakes, does not have drivers for them and offers to establish them yourself.
To do this, insert into the CD drive disk with the steering software and pedals, this disk is included in the package of products. Equipment installer from disk starts automatically. We establish all drivers and programs, perhaps reboot the computer.
CD-disk with power steering and pedals
Therefore, it is necessary to launch any game for testing the installation and try to manage the booster, not forgetting to slow down and accelerate the pedals.
Setting up system tools
Well, if there is no favorite race on the PC.
Then you can check the installation results with the system.
We go to the "Start" control panel and choose "Equipment and Sound".
In the window that opens, we need a "viewing devices and printers" - here we will see all connected devices, including our steering wheel.
"View devices and printers"
If there is no steering wheel, add it through the "Add" button (you need to search for it on the screen, it all depends on the version of the system and window presentation style).
Adding a new device
The system itself will try to find new devices and will offer everything in unified list. Choose the steering wheel in it and click "Next." The device will be installed - most likely, the system will install the driver from its library (repository) of the drivers, which was filled with CD.
But the steering wheel is not enough. When you run the game, it will not work with the helm or pedals. Yes, you just need the game itself to teach react to all turns of the steering wheel and pressing pedals. But this is already a completely different song, it depends on how foot the program developers themselves have stood, we usually go to "setting the game" and look at the screen carefully, in this passion without shedding coffee on the keyboard.
Connect and command line
Calibration of the steering wheel can be carried out with simpler means:
There is another way:
- We are now in the "Start / Control Panel / Equipment and Sound".
- Go to the Game Device section.
- Choose the desired and again through context menu - "Properties".
- The "Settings" window opens, and in it button to calibrate.
You do not need to be seven spans in the forehead to understand that the setting of the steering wheel and pedals are thin (well, the motorists from Lamborghini know it), so it is necessary to stock up at this stage at this stage.
Well, then we rush into this boundless sea of \u200b\u200bgames, where the steering wheel and pedals are real kings, or rather, they will make the kings already just you: AutoclubRevolution, DriverParalellines, TestDriveUnLimited, Richard Burns Rally, Live for Speed.
Among the listed there is no your beloved. Well, sorry, did not know! And what at all you can know in this inclination of the collections of tracks and models that appear almost every day new as mushrooms after the rain.
nastroyvse.ru.
How to configure the steering wheel on the computer
Setting the play steering wheel on the computer includes installation, calibration, checking and editing. Missing any item is undesirable if you want to get the maximum pleasure from the game. Consider all the steps in order.
Installation. In other words, installing equipment. Usually, the gaming devices are connected to the USB port and support automatic installation. After each installed Driver There is alert in the tray. When the device is fully recognized, the computer will notify about the successful completion of the process and will be offered to start calibration. Installation of the steering wheel, pedals and joysticks look like normal connection USB mice and keyboard.
If for some reason the equipment was not recognized, then install the drivers. You can download them from the official site of the manufacturer of the game product or from the disk that is invested in the steering wheel. The success of the operation is 95%. If this method did not help, then perform the installation manually. Call "Device Manager" through the Start menu and the Control Panel button. Next, select the category "Equipment and Sound" or immediately click "View devices and printers".
In a new window, all the devices are listed that are connected to this computer, among them there must be a steering wheel. If this did not turn out, then click the "Adding Device" button and wait for unidentified equipment. Click on the icon with the game device and follow the installation instructions.
Calibration. Or the optimization of the steering wheel under your requirements. It happens similarly to setting up a mouse where you want to set the cursor speed. The power of the pedal press is calibrated, the axis of rotation, the test of all buttons and levers is performed. To start the setup, enter the joy.cpl command in the "Run ..." window, which is called the "Win + R" keys or through "Start", "Standard", "Run". Select the steering wheel and click the "Properties" key. In a new window there will be four tabs, in three of which you need to set the steering wheel "for yourself".
Check and edit. At this point, everything is simple. Open the game, for example, "Need for Speed.»And leaf controls. In addition to the usual keyboard, setting the steering wheel, and go there. Note that when you first connect the steering wheel and pedals, the management of the game is set automatically and often does not meet the user's desire, so reassign all the buttons, especially the "gas" and "brake", turns to the left and "right". Save the parameters and start the race. Everything works fine? You are a big well done and set the steering wheel on the computer correctly. If not, do not despair, go back the calibration procedure and carefully read the control menu in the game. Use Google or YouTube to search for information on installing specifically your steering model under a specific game.
Before buying a steering wheel and pedals, make sure that the game is compatible with the device to avoid troubles later. And to extend the life of the game device, we advise not to allow wires of wires, pulling out of the USB port, the steering steering and the liquid shedding.
Good day! I think everyone familiar games like Need for Speed, four-wheel drive, various autosimulants to prepare for the passport exam. And how comfortable to play them when there is a steering wheel! Such from time immemorial was with me. It was good with him when Windows XP was on the computer, no problems! But time goes, Win 7, 8, 8.1, 10 appeared on the courtyard ... with each new version The problem of installing the old driver without digital signature It became more serious.
And I have an old steering wheel - Speedlink SL-6681. The driver for him was released back in 2007 and certainly did not know anything about the modern requirements for drivers.
What are the options?
- Buy new steering wheel
- Install on Windows XP virtual and try to break the steering wheel
- Disable digital signature check on Windows 10
The first option is very good, but this steering wheel has not yet worked out its resource, it is almost like new. Why are we forced to throw out quite good things? You won't update Windows - deprive support and updates after a certain period of time. Update Windows - there is a chance that the installation of an old printer and the old scanner will be problems.
Installing Windows. XP on a virtual man is also a good option, however, the steering wheel itself is not a very useful thing, you also need a game to him. But what will be playing on the same Need for Speed \u200b\u200bon a virtual man ... I will not guess, you just need to see. Somehow I will try.
But the last option is the most relevant. And no less problematic ... The latest Windows versions require the device driver to have a digital signature. The first thought that can visit any newcomer is to sign the driver, independently creating a self-signed certificate and placing it in trusted root certificates. Alas, just so this option will not pass, since Windows checks the certificate in its cross-certificates. If the certificate cannot be checked so much, the driver signature is considered invalid. Therefore, you need to look for the options for disconnecting the signature check.
I know three options:
- Restarting a computer with a selection of download type with a disconnected driver signature test
- Enabling Windows Test Mode
- Making changes in local politicians Security
The first is the easiest and, frankly, it was he who earned me. But at the same time, the most inconvenient, since before each session of the game, you must not forget to immediately choose the desired download option, or restart the already working computer. In order to make it in Windows 10, you need to type "Parameters" button in the search bar, in the window that opens, click on the "Update and Security" tile. In the left vertical menu it is necessary to select the "Restore" item.
Next step - Click on the "Restart Now" button. After rebooting, I have an invitation to enter a download method.
You can press 7 or F7, after which the operating system boot will begin in the mode we need. After the system is loaded, you can safely install the driver, agreeing with the warning system.
Option 2. Enable Windows Test Mode
Microsoft added test mode in Windows so that you can run various programs Without digital signature in order to test them. I would like to remove the last four words from the phrase)) To enable this mode, it is written everywhere that a single command running in the CMD console running with administrator rights
bcdedit.exe / set testsigning ON.
However, I gave me a computer to this error "An error occurred when specifying the element data. The value is protected by policies safe download And it cannot be changed or deleted. ":
They write that it is treated by disconnecting the DEP hardware function. Already good, right? We actually wanted to charge only, but now, and then looked, the next step is to rotate Kondeyev on the motherboard. It will not stop here that I will not stop, I will only say what it turns off through the BIOS. How exactly it is done, you need to look at the manual to your particular motherboard. However, there is a thing that must be done before you climb somewhere. It is necessary to check if this hardware DEP hardware is right.
Press the Win + R keys combination, the "Run" window will open, you type the command in it
A small boring gray window will open:
In it click on the "Connect ..." button. In the next window, we leave everything as it is, and click on the "Connect" button:
A bunch of buttons in the previous window is activated. We are interested in one "instances" button, and we click on it.
The next small gray window opens:
In the field marked with a red arrow in the picture, copy the name of the superclass Win32_operatingsystem And press the "OK" button. The next gray window will appear 100500, in which you need to double-click on the only point in the field specified by the red arrow in the figure below:
Patience, only patience! The last gray window opens in front of us, and this is a small flying center!
In this window there are several scrolling lists, we are interested in the list of "Properties". Scroll through the mouse to about the middle, looking for the item "DataExecutionPrevention_avaliable". If you have it, like me, put in True, therefore, the DEP hardware function is enabled, and to enable this unfortunate test windows modeYou must disable the DEP in the BIOS. There are no instructions here, because I do not want to mock the computer for the sake of the steering wheel.
Just say that as a result of the execution of the bcdedit.exe command / set Testsigning. ON In the CMD console, the inscription "Operation is completed successful" should appear.
At the same time, it is also necessary to understand that this can lead to reducing safety Computer, since the DEP hardware feature protects the computer from those attacks, the essence of which is that malicious executable code is placed in the process memory in which the executable code of the process itself is not contained, as Microsoft writes.
Option 3. Change local safety policies
An option with making changes to local security policies is suitable for those who have Windows installed on the computer. version pro. And cooler. Again, not my option. But nevertheless, he would not consider it wrong.
Using the combination of the Win + R keys call the "Run" window, in the appropriate field we enter the command gPedit.. mSC.. Go on the branch. User Configuration -\u003e Administrative Templates -\u003e System -\u003e Driver Installation, then click on the "Digital Signature of Device Drivers".
Click two times on this point mouse. We will open such a window:
To disable digital signature devices check, you need to include this policy.
Subscribe to blog updates!
Thank you! You have successfully subscribed to new blogging materials!
Over time, the gaming industry has become actively submitted to the public additional devices for certain genres. The steering wheel and pedals are excellent for moto and auto racing, which can help create the most real conditions in the game mode. Connecting the steering wheel with pedals to a computer or laptop involves the execution of a specific instruction that will be discussed below step by step.
Instructions for connecting
If difficulties arise when studying the instruction that is attached to the acquired device kit, it is recommended to study the following steps.
Device connection
In the box, together with the wheel and pedals should lying all wiresnecessary to ensure contact with the computer. As a rule, there are 2 cables in the box. One is needed for power connectionsand the other - for pedals. You must connect them, and then insert another end to a free USB connector.
Sometimes the kit includes a gearbox that needs to be attached to the steering wheel with separate wire. As a rule, this task does not cause difficulties when using the instructions.
Attention! In the presence of additional nutrition It also needs to be used before the start of the gaming process.
Installation of drivers
Ordinary simple devices without additional functions are most often determined in automatic mode. After a few seconds, after connecting the steering wheel to the computer, it will be ready for operation. But most often you have to download and installation of additional POSo that the device earns.
As a rule, the manufacturer is inserted into a separate DVD kit, where the necessary programs are already contained. If there is no drive, it is enough to go to the official website of the developer's company and open the Software section. Select the model of the purchased device and start downloading. 
Alternatively, you can download additional softwarewhich will automatically find the necessary drivers. For example, DriverPack Solution.
The program for tuning the steering wheel is usually also supplied with a device or laid on the manufacturer's official website.
Adding a device to the system
Since Windows is considered the most common operating system, we will use it as an example. In some cases, the use of suitable drivers is insufficient measure. System may issue a mistake and redirect gamer to the update center or correction windows errors. Then you will have to connect the steering wheel with pedals to a computer or laptop in manual mode:
Calibration
Before moving to gaming process, Gamer must make sure that all buttons meet the specified teams. To make it necessary to make a calibration that is identical in Windows 7, 8 and 10. To do this, perform several manipulations:
- press combinationWIN.+
R. and enter the command " joy.
cPL"And confirm the action;
- select the devicein active condition and proceed to properties;
- open the parameters and click on " calibrate»;
- should appear window Masterswhere you need to click on " further»;
- it remains to follow system promptsto go to perform the next step;
- you can observe the process yourself, any manipulation displayed on axesX. andY.;
- clean in order axisZ. and proceed to the final step;
- will leave the button " Ready"And the process is completed.
Checking the steering wheel
Checking performance - mandatory procedure before running the game. Sometimes gamers detect that not all buttons begin to work, so it is necessary to check:
How to create a profile in Logitech Profiler
Often, brand producers have their own software to relieve the life of gamers. For example, manufacturer Logitech has a special profiler. But other firms have similar applications and they work likewise. Therefore, consider the use of such software on the example of Logitech.
Most often, the Logitech Profiler program already comes complete to devices from the Logitech manufacturer. The main purpose is creating individual profiles For simulators. You can change and save the parameters for each game separately.
To create a new profile, you must select " New». 
Then come up with your own name. 
After performing these simple action, the profile will automatically be created and you can continue to work on.
In order for the games of autosimulants to deliver to players even more pleasure and allowed to make the process more realistic, manufacturers offer gaming controllers in the form of a steering wheel. Such devices are very convenient and functional, but before estimating their advantages, the user must put them and configure them. This is not so difficult, the main thing before installing the steering wheel on the computer, be sure to read the recommendations below.
Installation of the steering wheel on the computer
First you need to fix the steering wheel on the table in a convenient place for you. It will be possible to do with a clamp screw, which is already included in the gaming controller. Next, place the pedals under your table, so that during the seating for the PC you could reach them.
Since modern game rolls are connected via the USB interface, then you will need to find the corresponding cable before connecting the steering wheel to the computer. As a rule, it comes bundled with a game controller, but if it does not turn out, any other USB wire is suitable. It will need to first connect to the port of the steering wheel, and then to the corresponding connector located on the processor of your PC. After that, you will need to wait a few minutes to recognize the new equipment and start. automatic search Device drivers. As soon as this will be implemented, the system will inform you that the device is successfully connected.
It is worth noting that in some cases Windows may not find suitable drivers and here, you will need to do the following. First you need to go to the Device Manager. To do this, click on the desktop right-click on the "My Computer" label. After that, you will find a list of installed equipment, it will need to select the game steering wheel and click on it with right mouse button. In the menu that appears, you will need to select "Update Drivers". As soon as this command is executed, the OS will find all the necessary drivers. And you just will remain setting up your game equipment.
Configure the steering wheel on the computer
Before you configure the steering wheel on your computer, you will need to install the game you will manage using the controller. After that, it will be necessary to run it. Then it will be necessary to open the section "Options" and go to "Management Settings". Having done this, you will have a new window in it. Three partitions will appear, you will need to open "Alternative Management".
In it, you will first need to select the "Gas" tab and adjust the pressure of this pedal through the change in parameters to your needs. By choosing one speed mode, you can, by clicking on the gas pedal to understand whether it is suitable for you or not. If it is weak, you will need to try to choose the optimal and save changes. In the same way, the parameters for the steering wheel in the tab of the same name are set, only the test of its maneuverability will not be done not to the pedal, but the steering wheel.
Computer games are so capturing us into our virtual world that it merges with real. But this is sometimes not enough. Special devices are required, which must completely immerse the gamer in gaming reality. If you like virtual races, it is difficult to do without and pedals. And here are the devices purchased. Here in front of the gamer the following task: how to connect the steering wheel and pedals to them? The answer to the question we give several effective instructions from experienced gamers. After such recommendations, the process will seem light and fast.
Select the necessary devices
Turn the modern PC today into the game center is easier than simple. But how to connect the steering wheel and pedals to the computer? Let's start disassembling the procedure from the start. Namely with acquisition necessary equipment.
Self-making steering wheel
So, we make the steering wheel and pedals to the computer. The scheme and description will be presented below. Let's turn the algorithm step by step:
- The steering wheel can be filled out of wood, glue from several plates of plywood. First of all, you need to perform its detailed drawing on paper using a ruler and circula.
- Next, it is made by the hub, which is attached to the back of the steering wheel with screws or furniture glue.
- A hole is powered through the steering shaft. There insert a bolt with a cut head. Its ends are stepping with a file. In the resulting sites drilled holes. Springs are installed in these places.
- For fixing nuts, the steering shaft is also stepping from both sides.
- Bolt twists in a drilled hole on the axis. On both sides it is tightened with nuts. The second side of the spring is attached to the L-shaped bracket.
- Another important stage is to complete the mounting system to the table. Innek from the metal plate P-shaped bracket. It makes 4 holes for self-tapping screws.
- The next stage is the manufacture of a presser foot. In the middle, it dries a hole for 5 mm bolt.
- Scores are connected to the bracket so that it can move freely.
- From the base of the module to the paw should be a distance equal to the thickness of the table.
- Then the wizard drills the hole through the base of the steering module. A T-shaped thread bushing is inserted here.
- P-bracket screws screws to the wooden base of the module.
- The bolt with a rotary handle is passed into the hole of the paw, after which it is screwed into the T-sleeve.
Then you need to take care of the electronic "stuffing".
Approximately this makes the pedals and the steering wheel to the computer. Another option of homemade in the video below.
Independent manufacture of pedals
It is possible to build the steering wheel and pedals with your own hands and the geimer itself. These attributes will help you plunge into sports and transport simulators, virtual races. The devices fully represent the atmosphere of the racing route. Of course, they are really acquired in many electronics stores. But in the presence of certain knowledge in the field of mechanics and electronics, the steering wheel and pedals for a computer with their own hands can be constructed.
Imagine the instruction:
Connection of the steering wheel and pedals: Instruction number 1
Go now directly to the process. Imagine instructions, how to configure the game steering wheel. Connection is performed according to the scheme:
- Unpack the packaging with the game steering wheel. From the device must be a USB cord. Connect it to a convenient USB port on your computer.
- If the pedal goes, connect these attributes to the steering wheel.
- Insert the power supply unit into the socket. So we dismantled how to connect the steering wheel to the computer. How to setup?
- Enter any game on a PC, which would support the control of the game power steering. Move in the settings menu.
- You need to stay on "Management Settings" (or similar name).
- The mouse and keyboard settings may be listed. We do not need them. You go to the section with the name "Alternative Management" (or with a similar name).
- Here you can specify the necessary parameters for each of the steering buttons: to stay on the standard version or install your own, convenient values.
- In conclusion, only to save the settings will remain, check the performance of the connected attributes already in the process.
How to connect the steering wheel to any game, you now know. However, sometimes the PC does not "see" the connected device. What's the matter? There are two common reasons:
- The computer has not defined the device.
- In order for the steering wheel to be operational, you need to set the driver running to it.
You can detect the last problem already when using the control settings: when you try to shift the purpose of the key, the attribute button is not responding, not active. The driver usually comes on the disk bundled to the device. Install it, then enter the game and repeat all the actions, starting from the 4th point of the instruction, re-on.
Second power supply and pedals: instruction
And we deal with the second instruction, how to connect the game steering wheel and pedals to the computer. By the way, on a similar algorithm you can connect and steering out for the "marine" games. The problem in both cases most often arises the same: the absence of a software PC in the operating system responsible for the performance of gaming attributes.
How to connect the steering wheel for games along with the pedals:
Connect the steering wheel and pedals: Instruction number 3
We continue to disassemble how to connect the game steering wheel. We present the reader the following instructions:
The process of connecting the steering wheel and pedals: Instruction number 4
Another instruction how to connect the game steering wheel with pedals. We give this algorithm:
Connect gamepada
We dismantled how to connect the steering wheel and pedals to the computer. But if you decide to play on the popular game console "Ixbox"? It comes to the wireless gaming controller (gamepad, in other words). How to connect it to the game console?
- Click the Guide button on the gamepad itself. You need to hold the key until the controller is activated, and the gaming console.
- Now press the power button on the console itself once. But now in 20 seconds you need to have time to press and let go of the inclusion key already on the gamepad.
- Now you have to wait until the light bulbs indicators near the power button on the console will stop flashing. This will mean that the gamepad has successfully connected to the device.
- If this happens, check the batteries in the controller. In the case of dissenting elements of AA, change their new identical.
- Let's notify your attention that special devices are also supplied to power the gamepad: Xbox 360 Play & Charge Kit or Xbox 360 Quick CHARGE KIT.
- The game console is designed not only for solo, but also for the team game. Therefore, at the same time, up to four gamepads can be connected to the device. Each of the controllers is connected according to the scheme, which is presented above. Connect devices alternately.
- Be careful: to each of the gamepads on the console panel will be assigned a specific quadrant near the power button. How to determine it? The indicator lights up while connecting the gamepad to the console.
We know how to connect the wheel and pedals Logitech to a computer, gamepad to the gaming console. And now another important instruction - how to disable the controller:
- Hold the GUIDE button on the gamepad about three seconds.
- Then turn off the gamepad itself. The last console is turned off.
- Such decontamination is convenient because the next time the controller is automatically connected to the gaming console.
One gamepad can only be connected to one console! To use it for another, you need to interrupt the connection.
Parts are frequent when the gamer cannot connect the controller to the console. Specialists are advised to eliminate a malfunction like this: replace batteries in gamepad, and also remove all foreign objects between the controller and the console, which may interfere with the connection. Especially note the following:
- televisions;
- smartphones and Wireless Home Phones;
- microwaves;
- chrome and metal racks, chairs, tables, stands, and so on.
Connecting pedals separately from the steering wheel
Many users are interested in how to connect the pedals to the computer without a steering. Disappoint readers: it is impossible to do this. Someone is engaged in amateur, by repaid the pedals to the independent controller. But this is a vain work: the pedals will remain unconnected with each other.
Output one (as users offer in their feedbacks): You can purchase "aviation" pedals (specifically for airchanges), which are capable of functioning independently.
Power Calibration: Option number 1
Connect and install the steering wheel with pedals to the computer - this is only half of the case. It is important to configure it for the game. More precisely, calibrate. This feature is provided by the developers of many races in the menu of their game. As a rule, you should search for calibration in the settings.
Steering Calibration: Option number 2
Here for the reader one more optional calibration option.
- Click on "Start".
- Go to the "Control Panel".
- Then section "Equipment and sound".
- Here you need an item with game devices.
- Select from the wheelchair. Call the context menu, go to "Properties".
- The "Settings" menu opens. Here you need will be item "calibrate the device".
- Customized steering wheel? Now you can go to the boundless sea of \u200b\u200bgames!